TRAINING PENGENALAN MECHANICAL SEAL FOR ROTATING EQUIPMENT

TRAINING PERALATAN BERPUTAS

OVERVIEW

This  course deals with mechanical seals for rotating equipment. It is
intended that it will be used for the training of personnel in the use
maintenance  and  selection of mechanical seals. There are hundreds of
mechanical seal designs, but they all are variations of a basic layout
consisting of a collar mounted on the shaft which uses springs to push
a  ring  (which also rotates with the shaft) against another ring that
is held stationary.

The  rings  rotate  against  each  other  riding  on  a  thin layer of
lubricant,  and the springs hold them so tightly together that leakage
through  the  seal  is  reduced  to an immeasurable amount. The mating
surfaces of the rings must be perfectly flat to seal properly, and are
manufactured to tolerance measured “light- bands�. The course will
cover the principles, design features, installation and maintenance of
mechanical seals.

MATERI Training Mechanical Seal For Rotating Equipment

1. Introduction

2. General

3. Mechanical Seal Selection Procedures
* Selecting the mechanical seal Manufacture
* Determination of the mechanical seal pressure rating
* Mechanical seal selection and coding
* Mechanical seal coding as applied to specific specifications

4.  Examples  of  mechanical  Seal  Selection  in  Difficult Operating
Conditions

5. Vacuum Services

6. High-speed applications

7. High pressure boiler forced circulation Pump service

8. Corrosive Services

9. Temperature extremes

PARTICIPANT

Engineer, maintenance

Â

TRAINING  METHOD

Presentation

Discussion

Case Study

Evaluation

JADWAL TRAINING TAHUN 2026

03 – 04 Januari 2026 | 16 – 17 Januari 2026

06 – 07 Februari 2026 | 20 – 21 Februari 2026

05 – 06 Maret 2026 | 19 – 20 Maret 2026

03 – 04 April 2026 | 23 – 24 April 2026

07 – 08 Mei 2026 | 21 – 22 Mei 2026

05 – 06 Juni 2026 | 25 – 26 Juni 2026

09 – 10 Juli 2026 | 23 – 24 Juli 2026

06 – 07 Agustus 2026 | 20 – 21 Agustus 2026

04 – 05 September 2026 | 18 – 19 September 2026

08 – 09 Oktober 2026 | 22 – 23 Oktober 2026

06 – 07 November 2026 | 26 – 27 November 2026

04 – 05 Desember 2026 | 18 – 19 Desember 2026

Metode Training

1. Tatap Muka/offline
2. Online via zoom

Kota Penyelenggaraan jika offline :

1. Bandung
2. Jogjakarta
3. Surabaya
4. Jakarta

fasilitas yang didapatkan

1. Training Kit Eksklusif
   • Tas
   • Name Tag
   • Modul
   • Flash disk
   • Ballpoint
   • Block Note
   • Souvenir
2. Harga yang Reliable
3. Trainer Kompeten di bidangnya
4. Pelayanan Maksimal untuk peserta
5. Penjemputan dari dan ke bandara

Investasi :

Public training : Rp. 4.500.000 (minimum 3 pax)

In House Training : on Call