TRAINING MEDIUM VOLTAGE (POWER CIRCUIT BREAKERS AND SWITCHGEAR)

TRAINING PENGENALAN MEDIUM VOLTAGE

TRAINING PRINSIP KELISTRIKAN

DESCRIPTION

Switchgear  and  circuit breakers are obviously critical components in
electrical  distribution  systems  and  their  operation significantly
affects the overall operation of the system. The workshop will discuss
application,  installation, maintenance and testing issues relating to
medium  and  high  voltage switchgear and circuit breakers. There will
also  be  a  coverage  of  low  voltage switchgear. You will receive a
thorough grounding in switchgear theory and standards. You will gain a
solid   understanding   of  the  issues  associated  with  the  proper
application,  installation  and maintenance of these critical items of
equipment  with  an  overriding emphasis on safety. This comprehensive
and  practical  workshop  emphasizes  medium voltage switchgear which
represents most of the switchgear installed on electrical distribution
systems.  The  focus here is on air blast, oil, SF6 and vacuum circuit
breakers.  Case  studies  covering the main manufacturer’s equipment
will illustrate the important practical principles. Other power system
protection  components  will  be  discussed  as  well  to  ensure that
switchgear is understood in the correct context.

Â

OBJECTIVES
* Selection  of  appropriate type and rating of circuit breakers and
switchgear
* Fundamentals of operation of switchgear
* Switchgear components (CTs, VTs, relays, cable terminations)
* Safe  operational  policies  including  safety  rules  and  safety
documents
* Diagnostic tools and test equipment
* Safe  maintenance policies including safe working in switch rooms,
indoor and outdoor substations

MATERI Training Medium Voltage (Power Circuit Breakers and Switchgear)

1. Switchgear-Origins and Types

2. Application of Switchgear
* Principles of current interruption
* Plain break circuit breakers
* Bulk and small oil volume circuit breakers
* Turbulator (explosion pot)
* Operating mechanisms
* Transfer earth circuit breakers
* Air break and air blast switchgear
* SF6 and vacuum
* Switchgear in association with disconnectors
* Fixed and with drawable designs
* Switchgear standards
* Factors affecting switchgear selection

3. Specification of Switchgear
* Switchgear  rating-highest  system and impulse withstand voltages,
load and short circuit currents
* Simple and complex protection systems
* Switchgear ancillaries, measurement CTs, VTs, relays
* Cable terminations
* Indoor and outdoor operation
* Substation and switch room layouts and design

4. Short Circuit Testing
* Symmetrical and asymmetrical breaking
* Make and break operations
* Understanding test oscillograms

5. Safety Policies

6. Operation of Modern Switchgear

7. Asset Management in A Switchgear Content

8. Diagnostics, Testing and Maintenance
* Switchgear inspection methodologies
* Partial discharge measurement and survey
* Timing tests
* Thermovision
* Mechanisms of deterioration
* Principles of circuit breaker maintenance
* Maintaining oil circuit breakers
* Contact maintenance and contact wipe
* Oil testing
* Maintaining vacuum circuit breakers
* Maintaining SF6 circuit breakers
* SOP’s and DINs
* Switchgear defects and defect control systems

PESERTA

Pelatihan ini sesuai untuk diikuti oleh para personel yang bertanggung
jawab  dalam  proses  maintenance,  testing  dan  troubleshooting  low
voltage  power  circuit  breakers,  protective  relays,  breaker  trip
devices dan switchgear panels.

TRAINING METHOD

Presentation

Discussion

Case Study

Evaluation

JADWAL TRAINING TAHUN 2026

03 – 04 Januari 2026 | 16 – 17 Januari 2026

06 – 07 Februari 2026 | 20 – 21 Februari 2026

05 – 06 Maret 2026 | 19 – 20 Maret 2026

03 – 04 April 2026 | 23 – 24 April 2026

07 – 08 Mei 2026 | 21 – 22 Mei 2026

05 – 06 Juni 2026 | 25 – 26 Juni 2026

09 – 10 Juli 2026 | 23 – 24 Juli 2026

06 – 07 Agustus 2026 | 20 – 21 Agustus 2026

04 – 05 September 2026 | 18 – 19 September 2026

08 – 09 Oktober 2026 | 22 – 23 Oktober 2026

06 – 07 November 2026 | 26 – 27 November 2026

04 – 05 Desember 2026 | 18 – 19 Desember 2026

Metode Training

1. Tatap Muka/offline
2. Online via zoom

Kota Penyelenggaraan jika offline :

1. Bandung
2. Jogjakarta
3. Surabaya
4. Jakarta

fasilitas yang didapatkan

1. Training Kit Eksklusif
   • Tas
   • Name Tag
   • Modul
   • Flash disk
   • Ballpoint
   • Block Note
   • Souvenir
2. Harga yang Reliable
3. Trainer Kompeten di bidangnya
4. Pelayanan Maksimal untuk peserta
5. Penjemputan dari dan ke bandara

Investasi :

Public training : Rp. 4.500.000 (minimum 3 pax)

In House Training : on Call