TRAINING OBJEKTIF BEARING INSPECTION AND TECHNOLOGY

TRAINING PENGENALAN OBJEKTIF BEARING INSPECTION AND TECHNOLOGY

TRAINING INSPEKSI BEARING

Instructor by : Andi Sularto

DESCRIPTION

To  equip  participants  with  the knowledge to identify and recognize
characteristics that render bearings unserviceable and/or unacceptable
upon  engine  operation.  Participant will learn the basics of failure
analysis   identification   and   the   probablecauses   of  failures.
Participant  will also be informed of the cleanliness requirements for
the  oil  lubrication  system  and  will be taught proper handling and
installation  techniques,  methods,  and  practices  to  minimize  the
opportunity for premature bearing failures.

PURPOSE
1. Participants will understand the importance of bearing lubrication
and installation in achieving calculated bearing life
2. Participants   will   become   confident  in  performing  level  I
inspection and bearing serviceability
3. Participants  will  be  equipped  with  tools  to  assist  them in
resolving   complex   problems   and   in  thinking  laterally  to
fullyexplore possible causes of a problem

Â

 MATERI Training Objektif Bearing Inspection And TechnologyAL OUTLINE

1.  Level Inspection for serviceability :

– Demagnetization and cleaning

– Visual inspection

– Dimensional inspection

– Minor repair–blending/stoningof high material

– Marking

– Lubrication, preservation and packaging

– Disassembly and cleaning forinspection

– Types of bearing damage and failuremodes may include:
* Wear
* Indentation
* Smearing
* Surface distress
* Corrosion
* Electrical current
* Flaking
* Cracks
* Cage damage

– Classroom participation in analysis

2. Lubrication system cleanliness :

– Purpose of lubrication in bearings

– Bearing preservation

–  Types  of  oils  recommended  for  aero  engine, gearbox, and other
application aero engines

– Lubrication checks – methods and frequencies

– Flushing of oil system to remove debris

3. Bearing installation :

– The importance of cleanliness

– Mounting and installation of bearings including methods

– Inspecting and correcting fits and clearances

4. Workshop / Case Studies

WHO SHOULD ATTEND :

Bearing  room  inspectors, bearing removal and installation personnel,
and engineering staff responsible for engine reliability of commercial
aircraft   or  other  aero  engine  and  gearbox  equipment.  Rotating
equipment Engineers, reliability engineers, mechanics, and maintenance
supervisors. Anyone interested in rotating equipment performance.

JADWAL TRAINING TAHUN 2026

03 – 04 Januari 2026 | 16 – 17 Januari 2026

06 – 07 Februari 2026 | 20 – 21 Februari 2026

05 – 06 Maret 2026 | 19 – 20 Maret 2026

03 – 04 April 2026 | 23 – 24 April 2026

07 – 08 Mei 2026 | 21 – 22 Mei 2026

05 – 06 Juni 2026 | 25 – 26 Juni 2026

09 – 10 Juli 2026 | 23 – 24 Juli 2026

06 – 07 Agustus 2026 | 20 – 21 Agustus 2026

04 – 05 September 2026 | 18 – 19 September 2026

08 – 09 Oktober 2026 | 22 – 23 Oktober 2026

06 – 07 November 2026 | 26 – 27 November 2026

04 – 05 Desember 2026 | 18 – 19 Desember 2026

Metode Training

1. Tatap Muka/offline
2. Online via zoom

Kota Penyelenggaraan jika offline :

1. Bandung
2. Jogjakarta
3. Surabaya
4. Jakarta

fasilitas yang didapatkan

1. Training Kit Eksklusif
   • Tas
   • Name Tag
   • Modul
   • Flash disk
   • Ballpoint
   • Block Note
   • Souvenir
2. Harga yang Reliable
3. Trainer Kompeten di bidangnya
4. Pelayanan Maksimal untuk peserta
5. Penjemputan dari dan ke bandara

Investasi :

Public training : Rp. 4.500.000 (minimum 3 pax)

In House Training : on Call